Page 14 - SSRC Theatrical Stage Distribution | Switch Super | DMX Controlled Relay Panel
P. 14

Performance Specifications
BALTM Series
A. This assembly shall consist of an extruded aluminum wireway, 3.375” x 4.75” in cross section, and in the lengths specified containing terminal strips for feed conduit and wire extending to outlets (flush mount or pigtail), as specified.
B. Connectorstriphousingshallbefabricatedofblackextrudedaluminumwirewaywithinterlockingcover sections to exceed UL 1573 standards. Housing shall be inherently rustproof.
C. Connectorstripshallhaveanelectrostaticpaintfinishinblack,withoutletsidentifiedby2”highdie-cut circuit identification numbers on the vertical surface of the strip.
D. The strip shall contain 125o C XLP wiring of the proper sizes and quantities to connect the individual outlets to the terminal blocks in circuits of capacity as specified.
E. The terminal blocks shall be molded barrier type with screw lugs suitable for connecting multiconduc- tor feed cable or incoming wire. These shall be located in an extended terminal box of appropriate length when the strip contains more than twenty-20 AMP circuits. Terminal blocks can accept up to #8 gauge wire.
F. Units available with 20, 30, 50, 60 and 100 Amp devices in either flush mount or pigtail.
G. Connector strips shall be supplied with .125” thick by 1.5” steel C-channel mounting brackets. Brackets shall be suitable for single or double pipe battens, as specified, and shall extend above and below the strip. Brackets shall be 60” on centers. U-bolts shall be supplied to grip up to 2” O.D. standard steel pipe.
H. The entire assembly shall be listed and labeled by Underwriters Laboratories.
Ordering Information
2PGFL 20 Amp. Stage pin receptacle 2PGPT 20 Amp. Stage pin 18” pigtail L520R 20 Amp. Twist lock receptacle L520PT 20 Amp. Twist lock 18” pigtail 520R 20 Amp. Parallel blade receptacle 520PT 20 Amp. Parallel blade 18” pigtail 602PGFL 60 Amp. Stage pin receptacle 602PGPT 60 Amp. Stage pin 18” pigtail
Outlet type
Outlet quantity (if different)
Circuit quantity Length in feet
Connector strip series
Sample: BAL-40-12/24-2PGT
BAL Connector Strip 40’ 0” long with 24 - 18” pigtails and 20 amp stage pin connectors wired on 12 - 20 amp circuits plus 9 hanging brackets.
Please specify the following when ordering: terminal feed end, circuit numbering, outlet spacing and mounting bracket type. Consult the factory for custom types and sizes.
170 Fortis Dr. Duncan, SC 29334 864-848-9770 Fax 864-848-3746

   12   13   14   15   16