Page 16 - SSRC Theatrical Stage Distribution | Switch Super | DMX Controlled Relay Panel
P. 16

Performance Specifications
SLTM Series
A. This assembly shall consist of an extruded aluminum wireway, 2.5” x 3.375“ in cross section, and in lengths up to twenty feet. It shall contain a terminal strip for feed wire extending to outlets (flush mount or pigtail), as specified.
B. Connector strip housing shall be fabricated of black extruded aluminum wireway with interlocking cover sections to exceed UL 1573 standards. Housing shall be inherently rustproof.
C. Connector strip shall have an electrostatic paint finish in black, with outlets identified by 2” high die-cut circuit identification numbers on the vertical surface of the strip.
D. The strip shall contain 125o C XLP wiring of the proper sizes and quantities to connect the individual outlets to the terminal blocks in up to sixteen-20 Amp circuits.
E. The terminal blocks shall be molded barrier type with screw lugs suitable for connecting incoming wire. Terminal blocks can accept up to #10 gauge wire.
F. Connector strips shall be supplied with .125” thick by 1.5” steel C-channel mounting brackets. Brackets shall be suitable for single or double pipe battens, as specified, and shall extend above and below the strip. Brackets shall be 60” on centers. U-bolts shall be supplied to grip up to 2” O.D. standard steel pipe.
G. The entire assembly shall be listed and labeled by Underwriters Laboratories.
Ordering Information
2PGFL 20 Amp. Stage pin receptacle 2PGPT 20 Amp. Stage pin 18” pigtail L520R 20 Amp. Twist lock receptacle L520PT 20 Amp. Twist lock 18” pigtail 520R 20 Amp. Parallel blade receptacle 520PT 20 Amp. Parallel blade 18” pigtail 602PGFL 60 Amp. Stage pin receptacle 602PGPT 60 Amp. Stage pin 18” pigtail
Outlet type
Outlet quantity (if different)
Circuit quantity Length in feet
Connector strip series
Sample: SL-40-12/24-2PGT
SL Connector Strip 40’ 0” long with 24 - 18” pigtails and 20 amp stage pin connectors wired on 12 - 20 amp circuits plus 9 hanging brackets.
Please specify the following when ordering: terminal feed end, circuit numbering, outlet spacing and mounting bracket type. Consult the factory for custom types and sizes.
170 Fortis Dr. Duncan, SC 29334 864-848-9770 Fax 864-848-3746

   14   15   16   17   18